Silicones (more accurately called polymerized siloxanes or polysiloxanes) are mixed inorganic-organic polymers. Their general chemical formula can be written as [R2SiO]n, where R corresponds to an organic group such as methyl, ethyl, or phenyl. By varying their composition and molecular structures, silicones with a range of properties can be prepared. They can vary in consistency from liquid to gel to rubber to hard plastic. The most common siloxane is polydimethylsiloxane (PDMS), a silicone oil. The second largest group of silicone materials is based on silicone resins.
Different types of silicones have been developed for a variety of applications. For instance, they are used as sealants, molds, lubricants, dry cleaning solvents, electrical insulators, and protective material for electronic components. They are also found in some firestops, personal care products, and hearing aids. However, their uses in breast implants and nuclear reactor buildings have stirred controversy.
Silicone is often mistakenly referred to as "silicon." Although silicones contain silicon atoms, they are not made up exclusively of silicon, and they have completely different physical characteristics from elemental silicon.
The word "silicone" is derived from ketone. Dimethylsilicone and dimethyl ketone (acetone) have analogous chemical formulas, therefore it was surmised (incorrectly) that they have analogous structures. In the case of an acetone (or any ketone) molecule, there is a double bond between a carbon atom and an oxygen atom. On the other hand, a silicone molecule does not contain a double bond between a silicon atom and an oxygen atom. Chemists have found that the silicon atom forms a single bond with each of two oxygen atoms, rather than a double bond to a single atom.
Polysiloxanes are called "silicones" due to early mistaken assumptions about their structure. They consist of an inorganic silicon-oxygen backbone (...-Si-O-Si-O-Si-O-...) with organic side groups attached to the silicon atoms (see the figure showing the structure of polydimethylsiloxane). In some cases, organic side groups can be used to link two or more of these -Si-O- backbones together.
By varying the -Si-O- chain lengths, side groups, and crosslinking, a variety of silicones can be synthesized. The most common siloxane is linear polydimethylsiloxane (PDMS), a silicone oil (see the structure shown in the figure). The second largest group of silicone materials is based on silicone resins, which are formed by branched and cage-like oligosiloxanes.
Silicones are synthesized from chlorosilanes, tetraethoxysilane, and related compounds. In the case of PDMS, the starting material is dimethylchlorosilane, which reacts with water as follows:
During polymerization, this reaction evolves potentially hazardous hydrogen chloride gas. For medical uses, a process was developed where the chlorine atoms in the silane precursor were replaced with acetate groups, so that the reaction product of the final curing process is nontoxic acetic acid (vinegar). As a side effect, the curing process is also much slower in this case. This is the chemistry used in many consumer applications, such as silicone caulk and adhesives.
Silane precursors with more acid-forming groups and fewer methyl groups, such as methyltrichlorosilane, can be used to introduce branches or cross-links in the polymer chain. Ideally, each molecule of such a compound becomes a branch point. This can be used to produce hard silicone resins. Similarly, precursors with three methyl groups can be used to limit molecular weight, since each such molecule has only one reactive site and so forms the end of a siloxane chain.
Modern silicone resins are made with tetraethoxysilane, which reacts in a milder and more controllable manner than chlorosilanes.
Some of the most useful properties of silicone include:
A flexible, rubbery polysiloxane is known as silicone rubber. It can be extruded into tubes, strips, solid cord, and custom profiles. It offers excellent resistance to extreme temperatures and is highly inert toward most chemicals. Organic rubber, with a carbon-to-carbon backbone, is generally susceptible to ozone, UV, heat, and other aging factors. Silicone rubber, by contrast, can withstand the effects of these agents, making it the material of choice in many extreme environments. Given its inertness, it is used in many medical applications, including medical implants.
Many specialist grades of silicone rubber have these properties: electrical conductivity, low smoke emission, flame retardation, glow in the dark, and resistance to steam, gases, oils, acids, and other chemicals.
Two-part silicone systems are used to create rubber molds, which can be used for production casting of resins, foams, rubber, and low-temp alloys. A silicone mold generally requires little or no mold release or surface preparation, as most materials do not adhere to the silicone.
One-part silicone sealants are in common use to seal gaps, joints, and crevices in buildings. These silicones cure by absorbing atmospheric moisture. The strength and reliability of silicone rubber is widely acknowledged in the construction industry.
An excellent use of silicone rubber is for automotive sunroof seals, which have to endure harsh temperatures and other environmental conditions such as ozone, UV light, and pollution, not to mention common automotive cleaners, waxes, and so forth.
In the plumbing and automotive fields, silicone grease is often used as a lubricant. In plumbing, the grease is typically applied to O-rings in faucets and valves. In the automotive field, silicone grease is typically used as a lubricant for brake components, as it is stable at high temperatures, is insoluble in water, and far less likely than other lubricants to foul brake pads.
Silicone is also impregnated into parchment paper and used as a non-stick material for applications such as baking and steaming. The silicone also makes the paper heat- and grease-resistant. This allows the paper to line cookie sheets and act as a replacement for greasing, thereby speeding mass production of baked goods. It is also commonly used in pouch cooking, where ingredients are sealed into a container made of parchment paper and allowed to steam.
Silicone rubber is used to make utensils (notably spatulas) and bakeware.
Silicone resins are used in heat-resistant dishware. These often resemble ceramic items but are much less brittle, making them popular for use with babies.
Automotive spark plug wires are often insulated by multiple layers of silicone. In addition, electronic components are sometimes protected from environmental influences by enclosing them in silicone. This increases their stability against mechanical shock, radiation, and vibration. Silicones are selected over polyurethane or epoxy encapsulation when a wide operating temperature range is required (−150 to 600°F). Silicones also have the advantage of little heat increase in the curing process, low toxicity, good electrical properties, and high purity. Therefore they are used when durability and high performance are required of components under demanding conditions, such as for satellites in space.
In the 1980s and 1990s, controversy developed around claims that the silicone gel in breast implants was responsible for a number of systemic health problems, including autoimmune diseases and cancer. Multiple lawsuits claiming injury from implants resulted in the 1998 bankruptcy of Dow Corning and a moratorium on the use of silicone implants for breast augmentation in the US and Canada pending study. However, multiple studies and expert review panels performed worldwide since then have consistently concluded that women with silicone breast implants are no more likely to develop systemic illness than women without breast implants. In 2006, both Health Canada and the U.S. Food and Drug Administration (FDA) adopted positions similar to other countries in permitting the use of silicone implants for cosmetic breast augmentation in their respective countries.
When properly installed, silicone foam firestops can be fabricated for building code compliance. Advantages include flexibility and high dielectric strength. Disadvantages include poor bounding, combustibility (hard to extinguish), and significant smoke development.
Silicone foams have been used in North American as well as the Israeli Dimona nuclear reactor buildings, in attempting to firestop openings within fire-resistance rated wall and floor assemblies, to prevent the spread of flames and smoke from one room to another. The Israelis switched to the somewhat more expensive yet much safer "elastomer" version of this product, which avoids most safety concerns associated with the foamed version.
Silicone foam firestops have been the subject of serious controversy and press attention due to lack of proper bounding, smoke development (during the burning of some components in the foam), hydrogen gas escape, shrinkage, and cracking. These problems were exposed by Gerald W. Brown, leading to a large number of reportable events among licensees (operators of nuclear power plants) of the Nuclear Regulatory Commission (NRC).
Silicones are used as ingredients in some leave-in hair conditioner products. These formulations utilize silicone's water resistance to prevent humidity from entering a dry hair shaft and ruining the style.
A menstrual cup is a type of cup or barrier worn inside the vagina during menstruation to collect menstrual fluid. Menstrual cups are often made of silicone for durability and reusability.
Silicone is a common material used in molds for behind-the-ear style hearing aids. It has excellent sealing properties, making it an ideal choice for patients with profound hearing losses needing high-powered hearing aids.
Liquid silicone can be used as a dry cleaning solvent. Touted as an "environmentally friendly" alternative to the traditional perchloroethylene (or perc) solvent, the decamethylpentacyclosiloxane (D5) process has been patented by the company GreenEarth Cleaning. The solvent degrades into sand and trace amounts of water and CO2, and waste produced from the D5 dry-cleaning process is nontoxic and nonhazardous. This significantly reduces the environmental impact of a typically high-polluting industry.
Additionally, liquid silicone is chemically inert, meaning it does not react with fabrics or dyes during the cleaning process. This reduces the amount of fading and shrinking that most dry-cleaned garments experience.
All links retrieved September 18, 2015.
New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:
The history of this article since it was imported to New World Encyclopedia: