A mass of intergrown, striated pyrite crystals
|Chemical formula||iron persulfide (FeS2)|
|Color||Pale, dull gold|
|Crystal habit||Cubic, faces may be striated, but also frequently octahedral and pyritohedron. Often inter-grown, massive, radiated, granular, globular and stalactitic.|
|Crystal system||Isometric; bar 3 2/m|
|Fracture||Very uneven, sometimes conchoidal|
|Mohs Scale hardness||6 - 6.5|
|Streak||Greenish-black to brownish-black; smells of sulfur|
|Specific gravity||4.95 - 5.10|
|Melting point||1,177-1,188°C |
|Solubility||insoluble in water|
Pyrite (or iron pyrite) is the most common of the sulfide minerals. Chemically, it is known as iron disulfide (FeS2). Its metallic luster and brassy hue have earned it the nickname fool's gold. Ironically, small quantities of actual gold are occasionally associated with pyrite. Its polymorphic form, called marcasite, has the same chemical formula but is structurally different.
Pyrite is often used to make necklaces, bracelets, and other types of jewelry. In addition, it is used for the manufacture of sulfuric acid and sulfur dioxide, such as for the paper industry. It has also been used experimentally for radio detectors in oscillator circuits.
The name pyrite is from the Greek word pyr, meaning "fire." This is likely a reference to the sparks produced when pyrite is struck against steel. This capacity made it popular for use in early firearms, such as the wheellock.
Pyrite exposed to the environment during mining and excavation reacts with oxygen and water to form sulfuric acid. This process, known as acid mine drainage, involves the action of Thiobacillus bacteria, which generate their energy by using oxygen to oxidize ferrous iron (Fe2+) to ferric iron (Fe3+). The ferric iron in turn reacts with pyrite to produce ferrous iron and sulfuric acid. The ferrous iron is then available for oxidation by the bacteria. This cycle may continue until the pyrite is exhausted.
Pyrite is brittle and has a slightly uneven, conchoidal fracture. It has a hardness of 6–6.5 on the Mohs scale, and a specific gravity of 4.95–5.10. The powdered mineral smells of sulfur—a property that is useful for identifying it in the field.
The sulfur atoms in pyrite occur in pairs, with clear S-S bonds. These S-S pairs are known as "persulfide units," which can be viewed as derived from hydrogen persulfide, H2S2. Thus pyrite would be more appropriately called iron persulfide, not iron disulfide.
Pyrite is often confused with the mineral marcasite (named from the Arabic word for pyrite), due to their similar characteristics. Marcasite is a polymorph of pyrite, which means they have the same chemical formula but different structures. Their crystal shapes and symmetry therefore differ. The pyrite/marcasite pair is probably the second most well-known pair of polymorphs, after the diamond/graphite pair.
Marcasite is metastable relative to pyrite and slowly changes to pyrite over time, or if heated. Marcasite is relatively rare, but it may be locally abundant in some types of ore deposits, such as the Mississippi Valley-type lead-zinc deposits. Marcasite appears to form only from aqueous solutions.
From the perspective of classical inorganic chemistry, which assigns formal oxidation states to each atom, pyrite is probably best described as Fe2+S22-. In other words, the formal oxidation state of iron is Fe2+. This formalism recognizes that the sulfur atoms in pyrite occur in persulfide-like pairs. The sulfur atoms in marcasite occur in similar pairs, and the formal oxidation states of the atoms in marcasite are the same as for those in pyrite.
By contrast, molybdenite (MoS2) features isolated sulfide (S2-) centers. Consequently, the oxidation state of molybdenum is Mo4+, or Mo(IV).
Pyrite is often used in jewelry such as necklaces and bracelets. Its polymorph marcasite, although similar, cannot be used in jewelry as it has a tendency to crumble into powder. Adding to the confusion between marcasite and pyrite is the use of the word "marcasite" as a jewelry trade name. Small, polished, faceted stones of pyrite may be inlaid in sterling silver, but they are erroneously called marcasite.
In addition, pyrite is used for the production of sulfur dioxide, such as for the paper industry, and in the manufacture of sulfuric acid. These applications, however, are declining in importance.
Bravoite is a variety of pyrite enriched in nickel, with more than 50 percent substitution of Ni2+ for Fe2+. It is named after Peruvian scientist Jose J. Bravo (1874-1928), but it is not a formally recognized mineral.
Arsenopyrite is a mineral with the chemical formula FeAsS. Whereas pyrite has S2 subunits, arsenopyrite has AsS units.
All links retrieved June 17, 2015.
New World Encyclopedia writers and editors rewrote and completed the Wikipedia article in accordance with New World Encyclopedia standards. This article abides by terms of the Creative Commons CC-by-sa 3.0 License (CC-by-sa), which may be used and disseminated with proper attribution. Credit is due under the terms of this license that can reference both the New World Encyclopedia contributors and the selfless volunteer contributors of the Wikimedia Foundation. To cite this article click here for a list of acceptable citing formats.The history of earlier contributions by wikipedians is accessible to researchers here:
The history of this article since it was imported to New World Encyclopedia: